Panasonic SC-HC37GN - Page 90

90
Step 27 : Connect 18P FFC at the connector (CN900) on the
Button P.C.B..
Step 28 : Place the SMPS Unit on the Support Block.
Step 29 : Connect 7P extension cable (REX1538) from P1700
on the SMPS P.C.B. to CN1100 on the Main P.C.B..
Step 30 : Place the CD Mechanism on the Support Block.
Step 31 : Connect 30P extension cable (REE1712) from
CN6006 on the Main P.C.B. to CN7002 on the CD Servo
P. C. B ..
Step 32 : Use a tape to keep the centre switch (S643) pressed.