file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1403000000.html
14.3 DVD Self Diagnostic Function-Error Code
TOP PREVIOUS NEXT
Error Code Error Content Additional error explanation
U, H error
U11 Focus error
H01 Tray loading error
H02 Spindle servo error (Spindle servo, DSC (IC8271) SP motor, CLV servo error)
H03 Traverse servo error (Traverse motor, IC8251)
H04 Tracking servo error
H05 Seek error
H06 Power error Cannot switch off the power because of the panel and system
computer communication error
H07 Spindle motor drive error Spindle motor
DSC related
F500 DSC error DSC (IC8271) stops in the occurrence of servo error (startup,
focus error, etc.)
F501 DSC not Ready DSC-system computer communication error
(Communication failure caused by idling of DSC)
F502 DSC Time out error Similar disposal as F500
F503 DSC communication Failure Communication error (result error occurred although
communication command was sent)
F504 Error adjusting DSC data slice offset
F505 DSC Attention error Similar disposal as F500
F506 Invalid media Disc is flipped over, TOC unreadable, incompatible disc
media
ODC related
F600 Access failure to management information caused by
demodulation error
Operation stopped because navigation data is not accessible
caused by the demodulation defect
F601 Indeterminate sector ID requested Operation stopped caused by the request to access abnormal
ID data
F602 Access failure to LEAD-IN caused by demodulation
error
LEAD IN data unreadable
F603 Access failure to KEYDET caused by demodulation
error
Access failure to CSS data of disc
F610 ODC abnormality No permission for command execution
file:///C|/Documents and Settings/lopez/Pulpit/s/PANASONIC SA-HT870E_EG_EB/ALL/SVC/s1403000000.html (1 of 3)08-08-29 18:03:22
To Next Page
Loading...
