21
TQBJ2187
3 Remove the inner chassis.
Remove the inner chassis screws (x2) and lift up the
inner chassis.
•
Use a commercially available Phillips head screwdriver
(size: No. 1) to remove the screws.
4 Remove the battery.
Remove the screws (x4) and lift up the battery.
•
Use a commercially available Phillips head screwdriver
(size: No. 1) to remove the screws.
█
Handling of the used rechargeable battery
• Insulate the terminals with cellophane tape or similar
material.
• Do not disassemble.
• When the battery becomes unusable, bring it to a facility that
accepts used rechargeable batteries instead of disposing of
it.
█
To dispose of or transfer this unit
• The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
defaults to delete the user settings
(~17).
– The operation history may be recorded in the memory of
this unit.
inner
chassis
battery
SC-TMAX10.20GS.GW_TQBJ2187 En.fm Page 21 Tuesday, July 2, 2019 3:55 PM
To Next Page
Loading...
