Panasonic SD/HDD SDR-H20 - Page 17

17
LSQT1190
Before using
24 Card slot (l 29)
25 Tripod receptacle (l 18)
26 Battery release lever [BATTERY] (l 25)
27 LCD monitor (l 19)
28 Card slot open lever (l 29)
29 DVD COPY button [DVD COPY] (l 88)
30 Speaker
31 Power LCD plus button
[POWER LCD PLUS] (l 37)
32 Video light button [LIGHT] (SDR-H200)
(l 49)
33 Reset button [RESET] (l 116)
34 Mode select switch [AUTO/MANUAL/
FOCUS] (l 40, 55, 56)
35 Card slot cover [SD CARD] (l 29)
36 Card access lamp [ACCESS] (l 24, 87,
97)
37 Grip belt (l 17)
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad
position.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
25
26
24
27
29 30
31
36
35
33
32
28
34
Using grip belt
U.S.A. only
When this unit is purchased, a sensor tag is
attached to the grip belt. Remove the tag
before use.
1 Flip the belt.
2 Take off the tag.
3 Replace the belt.
37
2
3
1
3
1
2
LSQT1190(ENG).book 17 ページ ２００７年１月１３日 土曜日 午後３時３２分