94
LSQT1561
With a PC
Using a
Macintosh
1
If using a Macintosh
∫ Operating environment for the card reader function (mass storage)
≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some
personal computers cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1 Connect this unit to a PC via the
supplied USB cable.
≥ The USB function selection screen will appear.
2 Select [PC/RECORDER] # [HDD]
or [SD CARD] then press the
joystick.
3 Double-click [CAM_HDD] or
[CAM_SD] displayed on the
desktop.
≥ Files are stored in [100CDPFP] folder etc. in
the [DCIM] folder.
4 Drag and drop the files onto
destination folder (on the PC
hard disk).
∫ To disconnect USB cable safely
Drag [CAM_HDD] or [CAM_SD] disk
icon to the [Trash], and then
disconnect the USB cable.
Personal computer Macintosh
OS Mac OS X v10.4
Mac OS X v10.5
CPU PowerPC G5 (1.9 GHz or higher)
Intel Core Duo
Intel Core Solo
Interface USB port
SDR-H79P-LSQT1561_mst.book 94 ページ ２００９年２月１２日 木曜日 午後４時２１分
To Next Page
Loading...
