15
English
2
To avoid spattering of toothpaste, put the
Select the desired mode
• The device starts in the
previous mode used when
the power is turned on.
• Press the switch within
5 seconds to change modes.
(The blue mode indicator
illuminates to indicate the
selected mode.)
To switch the mode,
press the power switch
REGULAR
SOFT
3
Example brushing sequence
Divide your teeth into 4 parts
(upper and lower, left and right),
and brush one part in order such
as “
1
front of the teeth”, “
2
biting
plane of the teeth”, and “
3
back of
the teeth” spending 30 seconds.
Repeat this same procedure for
the other 3 areas.
• By brushing the above 4 parts
for 30 seconds each (about
2 minutes), you can evenly
brush your teeth without missing
any spots in your mouth.
•
timer function.”
4
Turn off the main unit before removing it from
• Press the switch after at least 5 seconds of
operation in one mode to turn the toothbrush off.
If you press the switch before 5 seconds of
operation have elapsed, the mode changes.
(See this page.)
Notes
• Do not put the main unit in contact with hair products,
hand creams, etc.
Doing so may damage the exterior.
• The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
• Use REGULAR mode if the brushing feels too strong
in W‑CLEAN mode, and use SOFT mode if it feels too
strong in REGULAR mode.
•
experience a tickling or tingling sensation caused by
the sonic vibrations.
The sensation should subside after you use the
toothbrush several more times.
• If you push the brush head too hard, the sound may
change, but this is not an abnormality.
To Next Page
Loading...
