19
English
Cleaning the main unit
Wash the main unit under
• Do not damage or rub the
waterproof rubber seal (A) with
hard materials.
Do not leave the main unit under
water. Water may enter inside.
• Do not wash with water hotter than 40 °C.
Doing so may damage the main unit.
Cleaning the AC adaptor and the charging stand
• Do not wash with water.
Cleaning the brush stand
1. Remove the inner frame.
1 Hold the right end of the
carrying case.
2 With the right end of the
inner frame facing up, pull up
the inner frame.
2. Wash with water and
wipe off water.
After cleaning
Wipe off water from the brush head and main unit for storage.
• Do not charge while it is wet. Doing so may cause soiling.
Attach by aligning the indentation (a) in
the brush head with the raised part (b)
•
Doing so may cause damage.
•
has no effect on its performance.
To Next Page
Loading...
