2. Select "GUTER TUNER" from the "SOURCE SELECT" section.
3. Press and hold the [ ] button for at least two seconds, and while
still pressing it, press the [ ] button simultaneously andhold
them for at least two seconds.
4. The LCD completely turns off.
[CD block]
item to check opration Display/Result
LCD in the CD
block
Turn each "CD PLAY" and
"SOURCE SELECT" buttons
on.
The segmentscorresponding to each
button turns on.
Turn all the buttons on. All the LCD turn on...Check the
indications of each LCD.
8.3. Self-diagnostic procedure of the rhythm micro-computer
1. While pressing the two select buttons [ ] and [ ]
simulutaneousely, turn the power on.
2. Select "RHYTHM" from the "SOURCE SELECT" section.
3. Using the UP/DOWN button next to the 7-segment display, change
the page of the self-diagnostic display. (Display 1 to 9)
- The self-diagnostic display page is indicated in 3rd digit of the 7-
segment display, and self-diagnostic result will be indicated in last
2 digits.
20
To Next Page
Loading...
