Panasonic SY-PA100 - Rear Panel Connections; Line Out 1 Terminal; Line Out 2 Terminal; Aux In 1 Terminal

Figure-4
6.4. Changing the traverse deck assy.
- Follow the item 6.1.
(Step 1)
Remove the 4 screws A (refer to Figure-5 ).
(Step 2)
Remove the FCC, and remove the traverse deck assy. (refer to Figure-5 ).
Figure-5
(Step 3)
Remove the 3 screws B (refer to Figure-6 ).
(Step 4)
Unsolder the motor terminal ( 4 points)(refer to Figure-6 ).
Figure-6
9