HDMI/DVI RGB range
(Auto / Nonstandard / Standard (16-235))
Prevents the blown out highlights and blocked up shadows when a wide-
range signal is received. Selects between standard RGB range (16-235 bits)
or non compliance (0-255 bits).
Auto:
Switches the RGB range (Nonstandard/Standard (16-235)) depending
on the HDMI signal information.
●
Not valid when Picture mode is set to Dolby Vision Vivid, Dolby Vision
Bright or Dolby Vision Dark
HDMI YCbCr range
(Nonstandard / Standard (16-235))
Selects between standard YCbCr range (16-235) or non-compliance (0-255).
●
Not valid when Picture mode is set to Dolby Vision Vivid, Dolby Vision
Bright or Dolby Vision Dark
Black level
(Light / Dark)
Select Dark when details are washed out in dark areas of picture.
EOTF type
(Auto / Traditional gamma / HLG / PQ)
Selects the EOTF type for video content. Set to Auto for general use.
●
Not valid when Picture mode is set to Dolby Vision Vivid, Dolby Vision
Bright or Dolby Vision Dark
3D Y/C filter
(On / Off)
Minimizes rough edges (dot crawl) in the picture from a composite source.
- 142 -
To Next Page
Loading...
