Panasonic TC-P50C1

Technical nforrnation
Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF**
standards
Data format: Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files: 9,999
Image resolution: 160 x 120 to 10,000,000
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association's standard
_.) ** EXIF (Exchangeable Image File Format)
C
Caution
@ AJPEG image modified with a PC may not be displayed.
@ Partly degraded files might be displayed at a reduced resolution.
(NND
@ Folder structure viewed in PC
I_100_PANA
Created automatically
3-digit folder number + 5-digit arbitrary characters
P100000_.JpG_4-digit arbitrary characters + 4-digit file number
i P1000002.JPG/@ Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and ....
I P1000003.JPG
I P1000004.JPG _
6_ The folder and file names may be different depending on the digital camera used.
@ For the suitable SD Memory Cards, please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs (This site is in English only)
@ Do not remove the card while the unit is accessing data (this can damage card or unit).
@ Do not touch the terminals on the back of the card.
@ Do not subject the card to high pressure or impact.
@ Insert the card in the correct direction (otherwise, card may be damaged).
@ Electrical interference, static electricity or erroneous operation may damage the data or card.
@ Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit.
(Panasonic is not liable for any deterioration or damage of recorded data.)
:_ The card is not inserted.
@ The card has no data or this type of data is not supported.
i_ The TV does not support theformat.Thefile IS broken or unreadable, l;
...... %, d
(Continued)
HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 30)
@ This function may not work normally depending on the equipment condition.
@ The equipment can be operated by other remote controls with this function on even if TV is in Standby mode.
@ Image or sound may not be available for the first few seconds when the playback starts.
@ image or sound may not be available for the first few seconds when input mode is switched.
@ Volume function will be displayed when adjusting the volume of the equipment.
@ If you connect the same kind of equipment at once (for example: one DIGA to HDMI I / another DIGA to HDMI 2), VlERA Link TM
is available for the terminal with the smaller number.
@ If you connect equipment that has "HDAVl Control 2 or later" function to the TV with HDMI cable, the sound from DIGITAL
AUDIO OUT terminal can be output as multi channel surround.
@ "HDAVI Control 4" is the newest standard (current as of December, 2008) for the HDAVI Control compatible equipment.
This standard is compatible with the conventional HDAVI equipment.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and the devices.
HDMI-compatible equipment ('1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
@ HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
@ If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
@ When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
@ Audio settings can be made on the "HDMI 1 in" or "HDMI 2 in" menu screen. (p. 26)
Applicable audio signal sampling frequencies (LPCM): 48 kHz, 44.1 kHz, 32 kHz
('1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
( Caution )
@ Use with a PC is not assumed.
@ All signals are reformatted before being displayed on the screen.
@ If the connected device has an aspect adjustment function, set the aspect ratio to "16:9".
@ These HDMI connectors are "type A".
@ These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
@ A device having no digital output terminal may be connected to the input terminal of either "COMPONENT", "S VIDEO", or
"VIDEO" to receive analog signals.
@ The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p.
Match the output setting of the digital device.
@ For details of the applicable HDMI signals, see p. 48.
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the
DIGITAL AUDIO OUT terminals.
( Caution )
@ Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
@ When an ATSC channel is selected, the output from the DIGITALAUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
@ Vivid: Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
@ Standard: Recommended for normal viewing conditions with subdued room lighting.
@ Cinema: For watching movies in a darkened room. It provides a soft, film-like picture.
@ Custom (Photo): Customizes each item according to your taste.
Photo is displayed in JPEG menu.
®
c)
:3=
o
6"
E,
©
46 47