Slide 53 Slide 53
Blink
Code
List of boards likely to cause this symptom.
No specific order
3 Blinks P, SS SC, A, K, Bluetooth module, Cs, Panel
Applies to Models
TC-P65VT60
TC-P60ZT60
TC-P65ZT60
Unplug the TV and remove
connector A1 from the A board. Plug
in the TV and press the power button.
Replace the K
board
Does the TV turn on
and stays on with the power
LED off?
Yes
No
Unplug the TV and reconnect A1. Set your
voltmeter to measure DC voltage. Ground the
negative (Black) lead and place the positive (Red)
lead on pin 10 of connector P6 on the P board.
. Plug-in the TV.
Does
15V
appears
briefly?
Replace the A
board
Unplug the TV and plug it back in.
(Do not turn the power on)
Is the power LED
off or is it blinking 3
times continuously
at a fast pace ?
Blinking 3 times
OFF
Unplug the TV. Reconnect
A1 and disconnect the
Bluetooth module. Plug in
the TV but don’t turn it on.
OFF
Is the power LED
off or is it blinking 3
times continuously
at a fast pace ?
Replace the
Bluetooth module
Blinking
3 times
Yes
No
Replace the P
board
Continue on
next slide (A)
( 1 of 3)
Start Here
Troubleshooting 3 Fast Blinks Failure (TC-P65VT60 – TC-P60ZT60 – TC-P65ZT60)
To Next Page
Loading...
