21
9.2.11. Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×3 , ×2 ) and remove the SU-
Board.
9.2.12. Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×3 , ×2 ) and remove the SD-
Board.
9.2.13. Remove the SC-Board
1. Disconnect the connector (SC2).
2. Disconnect the flexible cable (SC20).
3. Remove the screws (×8 ) and remove the SC-Board.
9.2.14. Remove the SS-Board
1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cables (SS62 and SS64).
4. Remove the screws (×6 , ×2 ) and remove the SS-
Board.
To Next Page
Loading...
