Panasonic TH-103PF10WK - Board Removal: C4-Board

TH-103PF10WK/TK/RK
41
7.29. Removal of C4-Board
1. Remove the Rear Cover Angle (C).
(Refer to Removal of C3-Board)
2. Remove the Reinforcement Angle (C).
(Refer to Removal of C3-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CA9,
CA10, CA11, C40, C41, C42).
5. Disconnect the connectors (C43, C44).
6. Remove 5 screws and then remove C4-Board.
7.30. Removal of C5-Board
1. Remove the Eye Bolt and Eye Bolt Cover.
2. Remove 15 screws ( ) and then remove the Fan (C), (D)
and Fan Block (E), (F).
3. Remove 5 screws ( ) and then remove the Rear Cover
Angle (E).
4. Remove 2 screws ( ) of Side Angle (L).
5. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (E).
6. Remove 6 screws of the flexible cable.
7. Remove the flexible cables from the connectors (CA12,
CA13, CA14, C50, C51, C53).
8. Disconnect the connectors (C52, C54).
9. Remove 6 screws and then remove C5-Board.