TH-103PF10WK/TK/RK
48
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (E).
7.42.6. Removal of CD-Board (F)
1. Remove the Fan Block (J).
(Refer to Removal of Fan)
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (F).
7.43. Removal of AC Inlet
1. Remove 2 screws and then remove the AC Inlet Cover.
2. Disconnect a connector (F1).
3. Remove 3 screws and then remove the AC-Inlet.
7.44. Removal of Cabinet and Front
Glass
7.44.1. Removal of Front Glass
1. Disconnect the connectors (DS15, SC34).
2. Remove 4 screws, and then side the Side Power Unit
upward.
3. Remode the side Power Unit.
4. Remove 44 screws and then remove cabinet with front
glass.
To Next Page
Loading...
