Panasonic TH-103PF12U - Removal of HA-Board; Removal of H5-Board; Removal of DS-Board

27
TH-103PF12U
9.5. Removal of HA-Board
1. Remove 4 screws (F) and then remove the HA Terminal
Block.
2. Remove 4 screws (G).
3. Remove 3 screws (H) and then remove HA-Board.
9.6. Removal of H5-Board
1. Remove 2 screws and then remove H5-Board Block.
2. Disconnect the connector (H51).
3. Remove 2 screws (J).
4. Remove 1 screw (K) and then remove H5-Board.
Note: when fixing H5-Board
• Screw on 1 screw (K) firstly.
9.7. Removal of DS-Board
1. Remove the HA Terminal Block and the HHH Terminal
Block.
(Refer to Removal of HA-Board and HHH-Board)
2. Remove H5-Board Block.
(Refer to Removal of H5-Board)
3. Remove 6 screws and then remove the Slot Case.