1. Disconnect the connectors (DS1, DS2, DS4, DS6, DS7,
DS8, DS9, DS10, DS14, DS15, DS30).
2. Remove 4 screws and then remove the Slot Block Case.
3. Remove 8 screws and then remove DS-Board.
6.7. Removal of HX-Board
1. Remove the HA Terminal Block and the HDD Terminal
Block.
(Refer to Removal of HA-Board and HDD-Board)
2. Remove 4 screws and then remove the Slot Block Case.
(Refer to Removal of DS-Board)
3. Remove 4 Hexagonal-Head screws (P) and 2 screws on
HX-Board, and then remove HX-Board.
16
TH-103PF9UK / TH-103PF9EK
To Next Page
Loading...
