3. Remove the flexible cables from the connectors (SS55,
SS56, SS57, SS58).
4. Disconnect the connectors (SS2, SS12, SS21, SS22,
SS23, SS24, SS25, SS26, SS27, SS28, SS35, SS42,
SS44).
5. Remove 13 screws and then remove SS-Board.
6.25. Removal of Fan
1. Disconnect the Fan relay connector.
2. Remove each 4 screws of Fan Block (A), (B), (C), (D), (E),
(F), (G), (H), (J), (K) and then remove the Fan Blocks.
3. Remove each screws and then remove Fans.
Note:
·
The Sponge (of Fans) is not re-useable.
Please use a new one when Fan exchange.
25
TH-103PF9UK / TH-103PF9EK
To Next Page
Loading...
