Panasonic TH-103PF9EK - Screensaver Time and After-Image Reduction; After-Image Prevention Features

6.32. Removal of C7-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove the Reinforcement Angle (F).
(Refer to Removal of SS3-Board)
3. Remove 4 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CB15,
CB16, C71).
5. Disconnect the connector (C74).
6. Remove 4 screws and then remove C7-Board.
6.33. Removal of C8-Board
1. Remove 6 screws of the flexible cable.
2. Remove the flexible cables from the connectors (CB12,
CB13, CB14, C80, C81, C83).
3. Disconnect the connectors (C82, C84, C88).
4. Remove 6 screws and then remove C8-Board.
6.34. Removal of C9-Board
1. Remove 5 screws and then remove the Rear Cover Angle
30
TH-103PF9UK / TH-103PF9EK