Panasonic TH-152UX1 - Removal of CR(C4)-Board; Removal of P5-Board; Removal of P9-Board; Removal of F_D-Board

34
TH-152UX1 / TH-152UX1W / TH-152UX1C
9.13. Removal of CR(C4)-Board
1. Remove each 2 screws and then remove the Heatsink.
2. Remove the flexible cable from the connector (C40CR).
3. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA13CR, CA14CR,
CA15CR, CA16CR).
4. Remove 7 screws ( ) and then remove CR(C4)-Board .
9.14. Removal of P5-Board
1. Disconnect the connectors (5P6, 5P9, 5P11, 5P25, 5P35
).
2. Remove 9 screws and then remove P5-Board.
9.15. Removal of P9-Board
1. Disconnect the connectors (9P6, 9P9, 9P11, 9P25, 9P35
).
2. Remove 9 screws and then remove P9-Board.
9.16. Removal of F_D-Board
1. Disconnect the connectors (DF1, DF9, DF91 ).
2. Remove 5 screws and then remove F_D-Board.
9.17. Removal of F1-Board
1. Disconnect the connectors (F11, F12, F13, F14, F15,
F16, F19, F51, F52, F53, F54, F55, F56 ).
2. Remove 6 screws and then remove F1-Board.
9.18. Removal of PB2-Board
1. Disconnect the connectors (2PB30, 2PB31, 2PB32 ,
2PB51 , 2PB53 , 2PB54 , 2PB55 , 2PB56 , 2PB57 ,
2PB59 , 2PB61 , 2PB62 , 2PB64 , 2PB66 , 2PB67 ,
2PB69 , 2PB71 ).
2. Remove 4 screws and then remove PB2-Board.