Panasonic TH-152UX1 - Removal of SCD-Board; Removal of P2-Board; Removal of P3-Board; Removal of P4-Board

51
TH-152UX1 / TH-152UX1W / TH-152UX1C
9.60. Removal of SCD-Board
1. Remove the SD1-Board.
(Refer to Removal of SD1-Board)
2. Remove the SD2-Board.
(Refer to Removal of SD2-Board)
3. Remove the SD3-Board.
(Refer to Removal of SD3-Board)
4. Disconnect the connectors(SC2D, SC3D, SC4D).
5. Remove the flexible cable from the connector (SC20D).
6. Remove 11 screws and then remove SCD-Board.
9.61. Removal of P2-Board
1. Remove the Fan Block F and G.
(Refer to Removal of Fan)
2. Remove the Eye Bolt (M20), M16 Nut Cover and Rear
Cover Fixed Plate (Upper Small).
(Refer to Removal of CC(C3)-Board)
3. Remove 4 screws and then remove Rear Cover Fixed
Plate Side Large.
4. Disconnect the connectors (2P6, 2P7,2P9, 2P11, 2P25 ).
5. Remove 9 screws and then remove P2-Board.
9.62. Removal of P3-Board
1. Remove the Fan Block F.
(Refer to Removal of Fan)
2. Disconnect the connectors (3P6, 3P7,3P9, 3P11, 3P25,
3P35 ).
3. Remove 9 screws and then remove P3-Board.
9.63. Removal of P4-Board
1. Remove the Fan Block E, F and K.
(Refer to Removal of Fan)
2. Remove the Eye Bolt (M20) ,M16 Nut Cover and Rear
Cover Fixed Plate (Upper Small).
(Refer to Removal of CC(C3)-Board)
3. Remove the Rear Cover Fixed Plate Side Large.
(Refer to Removal of P2-Board)
4. Disconnect the connectors (4P6, 4P7,4P9, 4P11, 4P25,
4P35 ).
5. Remove 9 screws and then remove P4-Board.
9.64. Removal of P6-Board
1. Remove the Fan Block R.
(Refer to Removal of Fan)
2. Disconnect the connectors (6P6, 6P9, 6P11, 6P25, 6P35
).
3. Remove 9 screws and then remove P6-Board.
9.65. Removal of P7-Board
1. Remove the Fan Block R and S.
(Refer to Removal of Fan)
2. Disconnect the connectors (7P9, 7P11, 7P25).