44
Pressing the FUNCTION button activates one of the following ve functions. The settings of
functions are performed with the “Function button assign 1” to “Function button assign 4” on
the Options menu. (see page 43)
3D Settings / Signal
The menu screen is displayed.
(Example: 3D Settings)
Safety Precautions
3D Settings
3D Picture Format
3D Picture Sequence
3D Picture Display
3D
Auto
Off
Pressing the FUNCTION button clears the menu.
Scrolling bar / Test patterns / Blue only
Con rmation screen (Example: Scrolling bar)
The operation
starts.
Scrolling bar
Activates the “Scrolling bar only” screensaver. After
15 minutes, the display enters standby mode.
To exit this mode, press any button.
Blue only
The screen displays only blue color for image
adjustment.
To exit this mode, press FUNCTION button.
Test patterns
Each time you press , a different test pattern is
displayed (seven in all).
Color Bars Red Green
Blue
Frame
(2 lines × 2 dots)
Black
1% window
To exit this mode, press any button other than .
Note:
“PC Power management” and “Auto power off” are deactivated during “Scrolling bar” or “Test patterns” operation.
(see page 34)
Item Adjustments
3D Safety Precautions
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from “On” to “Off”, the con rmation screen is displayed as below.
Pressing “YES” switches the setting.
YES NO
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
Using FUNCTION button
Options Adjustments
Yes No
Scrolling bar
Function 1
Press to
select
“Yes”.
Press.
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock” or “Remocon User level”
adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
button on main unit together with button on the remote control and hold for more than 5 seconds.
The “Shipping” menu is displayed and the lock is released when it disappears.
To Next Page
Loading...
