13
11. Select the Save Configuration button.
12. Wait for the page to reload.
13. Select the View Channel Lineup link to return to the Current Channel Lineup screen.
CONFIGURE THE AUXILIARY INPUT CHANNELS IN THE CHANNEL LINEUP
Complete the following steps to configure the auxiliary input channels in the FMA-101 channel
lineup.
Warning: Configuration of the auxiliary input channel is an optional
contracted service provided by LodgeNet! Hotels interested in this service
must contact LodgeNet to request auxiliary channel input configurations.
1. Select the Configure Channel Lineup link. A login screen will display.
2. Type panasonic in the User name field.
3. Type blan in the Password field.
4. Select the OK button. The Channel Lineup Configuration screen will display.
5. Add the auxiliary input channel to the lineup.
Select Digital Only from the Tuning Type drop-down list.
Type 254 in the Digital Mod field.
Type the digital stream in the Digital Stream field. Refer to the following table for a list of
input sources and the corresponding digital streams.
Input Source Digital Stream
Composite 1 1
Composite 2 33
S-Video 1 2
S-Video 2 34
Component 1 3
Component 2 35
VGA 1 4
VGA 2 36
DVI/HDMI 1 5
DVI/HDMI 2 37
DVI/HDMI 3 69
Type the auxiliary channel’s OSD (On Screen Display) in the OSD field. Note: The OSD
field supports up to 17 characters (including spaces).
Select Enabled from the State drop-down list.
Repeat the steps above for each additional auxiliary input channel.
6. Select the Save Configuration button after all the auxiliary input channels have been
configured.
To Next Page
Loading...
