9
Windows Vista or Windows 7
1. Select the Start button on the desktop.
2. Right-click on Network.
3. Select Properties.
4. Select Manage Network Connections.
5. Right-click on Local Area Connection.
6. Select Properties.
7. Select the Use the following IP address radio button.
8. Type an IP address from the following range: 10.20.1.81 – 10.20.1.92
9. Type 255.255.248.0 in the Subnet mask field.
10. Select OK twice.
CONNECT TO THE FMA-101
Complete the following steps to access the FMA-101 software.
Direct Connection between the FMA-101 and Laptop/Tablet
1. Connect an Ethernet (crossover) cable between the Ethernet port on the laptop/tablet and
the FMA-101’s Ethernet port.
2. Launch a web browser.
3. Type http://10.20.1.128 in the browser’s address bar and press <Enter>. The Current
Channel Lineup screen will display.
Network Connection between the FMA-101 and Laptop/Tablet
1. Configure the laptop/tablet network connection settings to provide access to the network.
2. Connect an Ethernet (straight-through) cable between a network Ethernet port and the
FMA-101’s Ethernet port.
3. Connect the FMA-101’s 12V DC power supply.
4. Wait for the FMA-101 to power up and obtain the network configuration settings from the
DHCP server. Note: This may take a minimum of 35 seconds to complete.
5. Launch a web browser.
6. Type http://fma101 in the browser’s address bar and press <Enter>. The Current Channel
Lineup screen will display.
CONFIGURE THE DATE/TIME
Complete the following steps to configure the date and time on the FMA-101.
1. Select the Configure Date/Time link at the bottom of the Current Channel Lineup screen to
display the Date and Time Configuration screen.
2. Modify the following Date and Time Configuration fields.
Month: Select the current month from the drop down menu.
Day of Month: Type the day of the month (1-31).
Year: Type the current year (2010-2047).
Hour: Type the current hour (0-23).
Minutes: Type the current minute (0-59).
To Next Page
Loading...
