5
Setting Up the TV
Preparation
Note the correct
polarity (+ or -)
push down
the cover
Inserting remote’s batteries
1 Lay the TV on a foam mat or thick soft cloth on a
table.
2 Remove the assembly screws from the TV.
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
Removing the pedestal from the TV
Wall mounting the TV (optional)
Illustrations shown may be different between models
and countries.
Note
Bracket x 2
Rope x 2
Anti-falling accessories
Pedestal
32-inch model
●
Assembly screws
(ST4 x 15) x 4
●
Base
Pedestal
43-inch model
●
Assembly screws
(ST4 x 20) x 4
●
Base
Attaching the pedestal
1 Assemble the pedestal
Please contact your local Panasonic dealer to purchase the
recommended wall-hanging bracket.
Rear of the TV
(View from the side)
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Depth of
screw
b
a
■
Holes for wall-hanging bracket installation
■
Model a b
32-inch 100 mm 100 mm
43-inch 200 mm 100 mm
Model Type
32-inch M4 8 mm 9 mm
43-inch M6 10 mm 12 mm
Depth of screw
Minimum Maximum
To Next Page