21
Selecting the input signal
Press to select the input signal to be played back from the equipment which has
been connected to the Display.
Input signals will change as follows:
PCHDMI1 HDMI2 Component*VIDEO DVI DIGITAL LINK
HDMI1, HDMI2: HDMI1 or HDMI2 input terminal in AV IN (HDMI).
VIDEO: Video input terminal in VIDEO IN.
Component*: Component or RGB input terminal in COMPONENT/RGB IN.
PC: PC input terminal in PC IN.
DVI: DVI input terminal in DVI-D IN.
* “Component” may be displayed as “RGB” depending on the setting of
“Component / RGB-in select”. (see page 42)
Notes:
Selecting is also possible by pressing the INPUT button
on the unit.
Select to match the signals from the source connected
to the component/RGB input terminals. (see page 42)
To Next Page
Loading...
