38
Clone the TV Setting
When installing a number of units in hotel or any facility, the data in master TV can be copied to USB
storage and then copy to other TVs.
Prepare blank USB storage
• Create pwd file as startup file at root directory of an empty USB storage using your
PC.
Insert a empty USB storage to your PC.
Right-click a blank area in a USB storage window, point to New, and then click text
document. A new file is created by default (New Text Document.txt).
Right-click the new text document that you just created and select rename, and
then change the name and extension of the file to the following file name and press
ENTER.
File name: hotelsys.pwd
Copy the setting data to the USB storage above
Insert the USB storage to the master TV
Displays the data copy screen automatically
• Insert/Remove the USB storage (p. 19)
Input 4-digit password (7970)
7970
Input password
Data copy (Hotel)
Follow the instructions on screen to complete copying the data
• The data folder will be automatically created at root directory of the USB storage.
Folder name: hotel_setup
Copy the setting data to other TV
Insert the USB storage with clone data
Displays the data copy screen automatically
<Clone data>
• User settings (Picture/Sound and other setup)
• Hotel menu items
• Channel map (stand alone operation only)
• Welcome Image file (JPEG)
Input 4-digit password (7971)
7971
Input password
Data copy (Hotel)
Follow the instructions on screen to complete the cloning.
Cycle AC power after the cloning completes
To Next Page
Loading...
