Panasonic TH-42PV500E - Q-Link; Connecting and Using Recording Devices

9. Disconnect the coupler (GS52) and the flexible cable
(GS12).
10. Remove the screws (×2
).
11. Remove the GS-Board and SD-Module.
6.31. Remove the K-Board
1. Disconnect the couplers (K1).
2. Remove the screws (×2
) and remove the grommet (×1).
3. Remove the K-Board.
6.32. Remove the S-Board
1. Remove the screw (×2 ).
2. Disconnect the couplers (S1).
3. Remove the screws (×2
) and remove the S-Board.
6.33. Remove the Plasma panel
section from the Front frame
(glass)
1. Remove the front frame and the plasma panel fastening
screw (×8
).
2. Remove the front frame and the stand brackets fastening
screw (×6
).
20
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B