Panasonic TH-42PWD8WS - Circuit Board Layout

Option menus default setting Contents
Off
-timer function Enable Off-timer operation Enable/Disable.
On
Screen display On Enable/Disable to display input mode indication after
power on and no signal indication.
Initial
INPUT Off Sets the initial input mode when the power is turned on .
Allow input mode selection while power is on.
Initial
VOL. level Off Sets the initial volume level when the power is turned
on.
Allow Volume control while power is on.
Maximum
VOL. Level Off Sets the maximum volume to desired level. Volume
cannot
exceed this level.
INPUT
lock Off Fixes the input mode to AV, Component/RGB or PC. Can
not change input mode by input selection key.
Studio
W/B Off Set warm mode color temperature to 3,200 Kelvin.
Advanced
PIP Off Off : Sets normal two screen display mode.
On : Sets Advanced PIP mode.
Display
size Off Adjusts the image display size on screen.
On : Sets the image display size approximately 95% of
the
normal image display.
Button
lock Off Enable/Disable front operation buttons (Input and/or
volume up/down)
Remocon
User Level Off Remote key invalidation.
Off : Valid key is all key of remote.
User1 : Valid key are only Stand-by (ON/OFF), Input,
Status, Surround, Sound mute On/Off, and volume
adjustment.
User2 : Valid key is only Stand-by (ON/OFF).
User3 : All keys are null and void
ID
Select 0 to 100 Set ID number from 001 to 100.
Remote
ID Off Remote ID function On/Off.
(While the Remote ID on, standard remote function can
not
control the unit.)
Serial
ID Off Serial ID function On/Off
Slot
power Off Sets the slot power mode the power is turned on.
Allow Optional Terminal Board insert Slots while power
is
on.
V.
Installation Off V. Installation function On/Off (Not used)
Rotate
Off Screen rotates 180°dgrees (up-down)
14. Circuit Board Layout
58