21
screws (×7 ).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6 ).
7.17. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.16.)
2. Disconnect the connector (S2).
3. Remove the screws (×2 ) and remove the S-Board
metal frame.
4. Remove the screws (×2 ) and remove the S-Board.
7.18. Remove the K-Board
1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the S-Board. (See section 7.20.)
3. Remove the screws (×2 ).
4. Disconnect the connector (K1) and Remove the K-Board.
To Next Page
Loading...
