Panasonic TH-49AF1U - Shipping Condition

To Next Page

To Previous Page

113

English

Shipping condition

You can reset the settings / the adjusted values of the

following menus to the factory settings:

[Picture], [Sound], [Setup], [Position], [Options]

At the same time, resets the settings and the data of

OpenPort PLATFORM to the factory settings and also

deletes the applications you have installed.

■ Remote control

Press <SETUP> to display the [Setup]

menu.

Select [OSD language] with

and press <ENTER> for more than 3

seconds.

The following screen will be displayed.

Options

Display serial number

Shipping

USB data cloning

Software licenses

OpenPort PLATFORM Shutdown

Select [Shipping] with and press

<ENTER>.

Note

●

The display may be greyed out in some

conditions, such as when the OpenPort

PLATFORM system is starting up. In this case,

the <ENTER> operation is disabled.

Shipping

YES NO

Select [YES] with and press

<ENTER>.

The message [Shipping ( Wait a moment )] will be

displayed.

After the message [Please turn off

the power] is displayed, turn the

power off pressing <Main Power On /

Off button>.

●

If the <Main Power On / Off button> is locked,

please disconnect the AC cord plug from the wall

outlet.

■ Unit

Press <MENU (Unit)> for several

times and display the [Setup] menu.

Select [OSD language] with , and

then press and hold <ENTER (Unit)>

for more than 5 seconds.

Note

●

The display may be greyed out in some

conditions, such as when the OpenPort

PLATFORM system is starting up. In this case,

the <ENTER (Unit)> operation is disabled.

Select [YES] with <- (Unit)> or

<+ (Unit)> and press <ENTER (Unit)>.