Panasonic TH-50PH10BK - Removal of the C1, C2, and the C3-Board; Removal of the S1-Board

6.15. Removal of the C1, C2, and
the C3-Board
6.15.1. Removal of the C1-Board
1. Remove the Flexible Cable from the connectors (C10,
C11).
2. Remove 10 screws (
) and then remove the Flexible Cable
from the connectors (CB1, CB2, CB3,CB4,CB5).
3. Remove 6 screws (
) and then remove the C1-Board.
6.15.2. Removal of the C2-Board
1. Remove the Flexible Cable from the connectors (C20, C21,
C22).
2. Remove 6 screws (
) and then remove the Flexible Cable
from the connectors (CB6, CB7, CB8).
3. Remove 4 screws (
) and then remove the C5-Board.
6.15.3. Removal of the C3-Board
1. Remove the Flexible Cable from the connector (C32).
2. Remove the connectors (C33 and C35).
3. Remove 6 screws and (
) then remove the Flexible Cable
from the connectors (CB9, CB10, CB11).
4. Remove 4 screws and (
) then remove the C3-Board.
6.16. Removal of the S1-Board
1. Disconnect the connector (SS34).
2. Remove 2 screws(G) and then remove the S1-Board Block.
3. Disconnect the connector (S34).
4. Remove 1 screw(H) and then remove the S1-Board.
13
TH-50PH10BK / TH-50PH10BS / TH-50PH10EK / TH-50PH10ES