19
7.6. Remove the Rear Terminal
cover
1. Remove the screws (×4 , ×3 ).
2. Remove the Rear Terminal cover.
7.7. Remove the A-Board unit
1. Unlock the cable clampers to free the cable.
2. Remove the screw (×1 ) and remove the Earth cable.
3. Disconnect the connectors (A1, A3, A5, A6, A7, A9, A10,
A11, A12, A30 and A51).
4. Remove the screws (×4 ) and remove the A-Board
unit.
7.8. Remove the A-Board
1. Remove the A-Board unit. (See section 7.7.)
2. Remove the screws (×8 ) and remove the A-Board.
7.9. Remove the Speaker box
(Woofer/L, Woofer/R)
1. Unlock the cable clampers to free the cable.
2. Disconnect the relay connectors.
3. Remove the screw (×4 each) and remove the
Speaker box (Woofer/L, Woofer/R).