Panasonic TH-50PZ850U - Remove the Front Bracket; Remove the Plasma Panel Sec- Tion from the Cabinet Assy (Glass)

23
7. Remove the screws (×4 ) and remove the C3-Board.
7.20. Remove the Front bracket
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (GS02, GS09 and GH11).
3. Disconnect the connector (A51). (See section 7.7.)
4. Remove the screws (×3 , ×2 ) and remove the
Front bracket.
7.21. Remove the G-Board, GS-
Board and GH-Board
1. Remove the Front bracket. (See section 7.20.)
2. Remove the screws (×5 ).
3. Remove the screws (×4 ).
4. Remove the Front shield case front and the Front shield
top.
5. Remove the GH-Board.
6. Remove the screw (×1 ) and remove the GS-Board.
7. Remove the screws (×3 ).
8. Disconnect the connector (G51) and remove the G-
Board.
7.22. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×8 , ×6 ).