Panasonic TH-50PZ850U - Remove the GL-Board; Remove the Screws

24
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6 ).
7.23. Remove the Speaker
(Squawker)
1. Remove the Cabinet assy. (See section 7.22.)
2. Disconnect the relay connectors.
3. Remove the screws (×2 each).
4. Remove the Speaker (Squawker/L, Squawker/R).
7.24. Remove the GL-Board
1. Remove the Cabinet assy. (See section 7.22.)
2. Remove the Speaker (Squawker /R). (See section 7.23.)
3. Remove the screws (×3 ) and remove the Bottom
shield R.
4. Disconnect the connector (GL02).
5. Remove the screws (×2 ) and remove the GL-Board.