12
Basic connections
■ Mains lead
AC 220-240 V
50 / 60 Hz
Mains lead
■ Aerial
TV
RF cable
Aerial
●
For Digital TV, Analogue TV
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
●
An aerial, correct cable (75 Ω coaxial) and correct
terminating plug are required to obtain optimum
quality picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the
wall aerial socket and the TV.
●
Your local Television Service Centre or dealer may
be able to assist you in obtaining the correct aerial
system for your particular area and the accessories
required.
●
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
■ Satellite dish
TV
Satellite cable
Satellite dish
●
For Satellite TV
●
To ensure your satellite dish is correctly installed,
please consult your local dealer. Also consult the
received satellite broadcasting companies for details.
Connections
●
External equipment and cables shown are not
supplied with this TV.
●
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
●
Check the terminal type and cable plugs are correct
for connection.
●
Use a fully wired HDMI compliant cable.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
●
Please also read the manual of the equipment being
connected.
Terminals
5 6 7 98
2
3
10
4
1 Model name plate
2 Headphone / Subwoofer jack
(p. 15)
3 USB 2 - 3 port
This symbol indicates DC operation.
4 HDMI4
5 DIGITAL AUDIO OUT
(p. 14)
6 ETHERNET terminal
(p. 13)
7 AV IN
(p. 14)
8 HDMI1 - 3
(p. 13, 14)
9 USB 1 port
This symbol indicates DC operation.
10 Satellite terminal
(p. 12)
Aerial terminal
(p. 12)
●
To watch content in 4K format, use HDMI terminal.
(p. 14)
To Next Page
Loading...
