Advanced settings
1. Display the menu with MENU.
2. Select Sound and press OK to access.
3. Select one of the following items and press OK to access.
MPX / Digital Audio Preference / SPDIF Selection / PCM Optical Level /
HDMI Input
4. Set the item and press OK to store.
MPX
Selects multiplex sound mode (if available).
Stereo:
Use this normally.
Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted
●
For Analogue TV
When you receive the stereo / bilingual sound system, sound output modes
can be selected by using the MPX in the Sound Menu.
●
Meanings of mode indicators
: STEREO
: MAIN I
: SUB II
: MONO
- 85 -
To Next Page
Loading...
