6
• Do not push down hard on the Pen tip.
• If there is surface contamination of the electronic pen, wipe it off with a soft cloth.
For heavy contamination, wipe it off with a soft cloth dampened with a mild soap solution after squeezing water
out of the cloth, and then dry the surface with a soft, dry cloth. Ingress of water droplets may cause a failure.
• Do not drop the electronic pen because it may get broken or malfunction.
• Do not use the pen tip if foreign material is adhering to it or if it is deformed or damaged.
Doing so may dirty or scratch the screen.
• Do not store the electronic pen with its pen tip pressed. If it is stored in an ordinary pen stand, the pen
tip will be kept pressed and that may weaken the internal spring or damage the pen tip.
• Because it is protruding, be careful not to bump or catch any object on the pen tip of the electronic
pen. Also if this part is covered, the electronic pen will not function correctly.
• Do not use the electronic pen for other purposes than operating the Interactive Plasma Display.
Requests regarding handling
To Next Page
Loading...
