Panasonic TH-65PF10WK - Disassembly and Assembly Instructions; Removal of Rear Cover; Removal of HA-Board; Removal of HDMI-Board

TH-65PF10WK/TK
20
8 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• and marks indicate screw positions.
8.1. Removal of Rear Cover
1. Remove screws (×22 , ×8 , ×11 , ×4 , ×4 ) and
then remove the Rear Cover.
8.2. Removal of HA-Board
1. Remove 4 screws (A) and then remove the HA Terminal
Block.
2. Remove 4 screws (B).
3. Remove 2 screws (C) and then remove HA-Board.
8.3. Removal of HDMI-Board
1. Remove 4 screws (D) and then remove the HDMI Termi-
nal Block.
2. Remove 4 screws (E).
3. Remove 2 screws (F) and then remove HDMI-Board.
8.4. Removal of DS-Board
1. Remove the HA Terminal Block and the HDMI Terminal
Block.
(Refer to Removal of HA-Board and HDMI-Board)
2. Remove the Flexible Cables from the connectors (DS1,
DS6).
3. Disconnect the connectors (DS2, DS3, DS4, DS7, DS8,
DS10, DS14, DS15, DS30).
4. Remove 4 screws and then remove the Slot Case.
5. Remove 9 screws and then remove DS-Board and Fixed
Plate.
8.5. Removal of HX-Board
1. Remove the HA Terminal Block and the HDMI Terminal
Block.
(Refer to Removal of HA-Board and HDMI-Board)