TH-65PF10WK/TK
31
9 Measurements and Adjustments
9.1. Adjustment Procedure
9.1.1. Driver Set-up
9.1.1.1. Item / Preparation
1. Input a white signal pattern to plasma video input.
Aging pattern : 1
2. Set the picture adjustment items as follows.
• Picture menu : Standard
• Color temperature : Normal
• Picture : 25
• Aspect : Full
9.1.1.2. Adjustments
Adjust driver section voltages referring the panel data on the Panel Label.
*See the Panel Label.
Caution
1. First perform Vsus voltage adjustment.
2. Confirmation of Vscn voltage should be performed after confirmation of Vad voltage adjustment.
When Vad = -90V, Voltage of Vscn is 50V ± 4V.
Name Test Point Voltage Volume Remarks
Vsus TPVSUS (SS) Vsus ± 2V VR251 (P) *
Ve TPVE (SS) Ve ± 1V VR6000 (SS) *
Vda TPVDA (SS) 72V + 1V, -3V Fixed
Vad TPVAD (SC) -90V ± 1V VR6600 (SC)
Vscn TPVSCN (SC) Vad + 140V ± 4V Fixed
Vset TPVSET (SC) 240V ± 7V Fixed
To Next Page
Loading...
