Panasonic TH-65PF12EK - Removal of SU-Board and SD-Board

25
TH-65PF12EK
8. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
9.14. Removal of SU-Board and SD-
Board
1. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
2. Disconnect the connectors (SU41, SD42, SD46).
3. Remove 6 screws ( ).
4. Remove 6 screws ( ) and then remove SU-Board and
SD-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 6 screws ( ) firstly.