17
English
Connections
AC cord connection and fixing /
Cable fixing
Back of the unit
AC cord fixing
AC cord (supplied)
Plug the connector into the display unit.
Plug the connector until it clicks.
Note
●
Make sure that the connector is locked on both the
left and right sides.
Unplug the AC cord
Unplug the connector pressing the two knobs.
Note
●
Do not use an AC cord of which the knobs are
damaged. If it is used with the knobs damaged, a
bad connection may result between the AC cord
connector and the AC IN terminal. For the repair of
the AC cord, consult the dealer where you purchased
the product.
●
When disconnecting the AC cord, be absolutely sure
to disconnect the AC cord plug at the socket outlet
first.
●
The supplied AC cord is for this unit exclusive use. Do
not use this for other purposes.
Cable fixing
Note
●
3 clampers are supplied with this unit. Fix the cables
at 3 locations using the holes for clampers as shown
below.
●
Before turning the power on, stop the holes
(3 locations) with the clampers.
Otherwise, foreign objects may enter the holes,
resulting in a fire.
•
If you need more clampers, purchase them from
your dealer. (Available from the customer service)
Holes for attaching the clampers
Holes for attaching the clampers
Holes for attaching the clampers
Holes for attaching the clampers
Holes for attaching the clampers
To Next Page
Loading...
