- 165 -
●
Even if the temperature of parts of the front, top and rear panels has
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
Permanently lit spots on screen
●
Due to production process involved in this technology this may result in
some pixels which are permanently lit or unlit. This is not a malfunction.
Maintenance
Care and Cleaning
First, remove the mains plug from the socket outlet.
■ Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surfaces of the display panel, cabinet, or pedestal using a
soft cloth to clean the dirt or fingerprints.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with clean water
or diluted neutral detergent (1 part detergent to 100 parts water). Wring the
cloth and wipe the surface. Finally, wipe away all the moisture.
= Caution =
●
Do not use a hard cloth or rub the surface too hard, otherwise this may
cause scratches on the surface.
To Next Page
Loading...
