- 102 -
Playback repeat within the title or selected file (depending on the content)
Audio output settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL
AUDIO OUT or HDMI2 (ARC function) terminal.
●
To confirm or change the current sound status
Media Player Video mode Video Setup
1. Display the menu with MENU
2. Select Sound
SPDIF Selection with / and press OK to access
3. Select Auto / PCM with
/ and press OK to set
SPDIF Selection
(Auto / PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
OUT and HDMI2 (ARC function) terminals.
●
SPDIF is a standard audio transfer file format.
Auto:
Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as PCM. DTS is output as
DTS.
PCM:
Digital output signal is fixed to PCM.
●
ARC (Audio Return Channel) is a function of digital audio output using
HDMI cable.
Recorded TV mode
Selecting content
●
For exclusive USB HDD
●
To play back contents in the USB HDD, ensure the connection and
settings are completed.
Recording USB HDD setup
1. Contents list of the selected device is displayed in Recorded TV mode
●
Remaining capacity of the selected device is displayed on the top right.
(This value may not be accurate depending on the condition.)
●
Contents list is displayed as All or Not Viewed.
All:
All the recorded contents are listed.
To Next Page
Loading...
