21
6.1.2. Display unit
6.1.2.1. How to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the Display unit, press [MENU] button on the remote
control for more than 3 seconds.
6.1.2.2. Exit
Disconnect the AC cord from wall outlet.
6.1.2.3. Screen display
6.1.2.4. Check Point
Confirm the following parts if NG was displayed.
To Next Page
Loading...
