Panasonic TU-PT700U - Remove the G-Board; Remove the DT-Board and JA-Board; Remove the DV Board

6.5. Remove the G-Board
1. Remove the couplers (G7, G10), the screws (×4) and
remove the G-Board.
6.6. Remove the DT-Board and JA-
Board
1. Remove the couplers (JA18: on the JA-Board, P10: on the
P-Board)and an antenna cable (connected to the T-Board
Tuner).
2. Remove the screws (×4
) and the DT-Board support
angle.
3. Remove the screws (×2
) and the JA-Board support
angle.
4. Disconnect the coupler (JA23-DG23) and remove the DT-
Board with the JA-Board.
5. Disconnect the coupler (JA8007-JK8007) to separate the
JA-Board and DT-Board.
6. Remove the screws (×2
) and remove the DT-Board
bracket with the fan.
6.7. Remove the DV Board
1. Remove the screws (×4 ), the coupler (DG3: on the DG-
Board, H7: on the H-Board, DV13) and remove the DV-
Board with the DV-Board cover bracket.
10
TU-PT700U