Panasonic TU-PT700U - 6 C.board Replacement Method; Remove the JG-Board; Remove the P-Board; Remove the K-Board

WARNING :
disconnect the unit from power source before disassembly
6.1. Remove the JG-Board
1. Remove the screws (×3) and remove the JG-Board with the
Bracket.
2. Remove the screws (×2) to remove the JG-Board bracket
and the Shield cover, and remove a coupler (JG31).
6.2. Remove the P-Board
1. Remove the couplers (P2, P10, P11, P13, P18, (PF1)), the
screws (×2
) and remove the JA-Board support angle.
2. Remove the screws (×4
) and remove the P-Board.
6.3. Remove the K-Board
1. Remove a coupler (K12), the screws (×3) and remove the
K-Board.
6.4. Remove the BL-Board
1. Remove a coupler (BL1), the screws (×2) and remove the
BL-Board.
6 P.C.Board replacement method
9
TU-PT700U