- 81 -
■ Edit DVB / Analogue Channels
●
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with Numeric buttons or
/ , and press
(green) to store.
●
To retune each channel (Manual Tuning)
(red)
– For Analogue
Watching > Tuning and editing channels > Manual Tuning
– Only for the revealed channels
●
To rename the channel name (Analogue)
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with
/ / / or
Numeric buttons, and press OK to set.
3) Press BACK/RETURN to store.
= Note =
●
If a VCR is connected only with the RF cable in Analogue, edit VCR.
To Next Page