●
To add all channels to the list (if available)
1) Press
(yellow).
2) Press
(green) to add all (depending on the broadcaster).
●
To add consecutive channels to the list at once (if available)
1) Press
(yellow).
2) Make the channel block and press OK to add.
●
To change the category of Channels Found
(blue)
2. Press BACK and OK to store.
●
To exchange channel list (Satellite)
1) Display the menu with MENU, select Main Menu and press OK to
access.
2) Select Setup > Other Settings > Exchange Channel List and press OK
to access.
3) Follow the on-screen instructions.
– During the operation, remove USB devices other than the USB Flash
Memory used for this function.
Settings > Setup > Other Settings
= Note =
●
If a VCR is connected only with the RF cable in Analogue, edit VCR.
- 139 -
To Next Page
Loading...
