Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching > Tuning and editing channels > Auto Setup
LNB Configuration
Selects the satellite for each LNB.
Watching > Tuning and editing channels > Auto Setup
Attenuator
Automatically reduces the cable signal to avoid the interference.
Watching > Tuning and editing channels > Other settings
= Note =
●
The settings in Tuning Menu are applicable only for the selected TV
mode. The menu name varies depending on the TV mode and country
you select. (DVB-C Tuning Menu / Freeview Tuning Menu / DVB-T Tuning
Menu / Satellite Tuning Menu / Analogue Tuning Menu)
- 342 -
To Next Page
Loading...
